Diamond Blades for Dekton

Diamond Blades for Dekton

Best DEKTON® Diamond Blades

When it comes to cutting ultracompact surfaces, fabricators seek diamond tooling that designed specifically for cutting these types of surfaces. Even very dense materials like porcelain and ceramic can require special cutting equipment. It stand to reason then that DEKTON® would need a very tailored tool set. In this post, we are going to analyze some of the features of DEKTON® surfaces and consider some blades that have been specifically designed for use on this material that seems to be taking the stone industry by storm.

What is DEKTON®?

That question is among the top questions that people want to get an answer to when it comes to this new, high-end material. DEKTON® is a material produced by Cosentino (the same company that produces Silestone), but DEKTON® is different from Silestone. In fact, this material is different from virtually all other materials.

To see what DEKTON® is, why not go right to the source? Here is a quote from the Dekton website:

DEKTON is a sophisticated blend of the raw materials used to produce the very latest in glass and porcelain as well as the highest quality quartz work surfaces.

Using an exclusive process dubbed TSP, DEKTON® is produced. This technology accelerates the natural process that causes metamorphic change in materials to produce natural stone. The result is an extremely durable surface that is ultra-compact and which is known as DEKTON®. So that’s what DEKTON® is, now what do you cut it with?

Diamond Blades Made for Cutting DEKTON®

Since the material is so hard, it requires tools designed for working with it. When you look for tools approved for DEKTON® you will find a selection of blades that will work for cutting it and they will range in price. Let’s take a look at some blades though, that have been approved by Cosentino to cut DEKTON®

Tenax DEKTON® Bridge Saw Blade

One of the primary features you will be concerned with getting in a DEKTON® blade is an excellent quality rating. However, you also want a blade that offers a a high feed speed. This is because your production rate has a direct impact on your shop’s profitability. Additionally, there are other profit reducers like the ones mentioned in this article, but slow cut times can add up. The 14″ and 16″ DEKTON® Bridge Saw Blades from Tenax offer a high feed speed to go along with the quality.

Tenax DEKTON® Blade Specs

Here are the specifications for the these Tenax diamond bridge saw blades for DEKTON®:

Dekton® Thickness RPM ∅360 RPM ∅410 RPM ∅460 Feed Speed FT/Minute
8mm 2100-2400 1700-2100 1500-1800 48″-60″
12mm 2100-2400 1700-2100 1500-1800 40″-48″
20mm 2100-2400 1700-2100 1500-1800 24″-40″
30mm 2100-2400 1700-2100 1500-1800 16″-24″

In fact, the top rated blades in the list of bridge saw blades approved by Cosentino to use on DEKTON® include these.

Weha’s DEKTON® Blade

Perhaps best known for its White Lion Quartzite bridge saw blades, Weha also offers an array of DEKTON® bridge saw blades and other blades too. The bridge saw blades are available in the following sizes:

  • 14″ Dekton Blade
  • 16″ Dekton Blade
  • 18″ Dekton Blade

Weha focused on performance rather than price when designing these bridge saw blades. The website makes the following statement at the time of this post:

There are a wide variety of prices out there for Dekton Bridge Saw Blades. Weha set aside a price target. We didn’t build a blade with the idea of being the cheapest. Instead, we focused on quality, longevity, and the best cut that can be made on Dekton, Neolith, and other materials. Weha felt that focusing on creating the best cutting and longest lasting Dekton Blade was by far the most important job we needed to do for fabricators cutting these materials.

The website also goe on to say that these DEKTON® blades will yield 10%-20% more life than other blades you will find in about the same price range. So, these too, might be blades that you want to consider if you are looking for a good all around performing bridge saw blade for DEKTON®

Small DEKTON® Diamond Blades

Along with the bridge saw blades, fabrication professionals make use of good quality turbo blades geared toward cutting DEKTON® materials. And, as we mentioned before Weha offers many diamond blades. Furthermore, included in the selection are the smaller R-Mesh Turbo Blades for DEKTON® and other hard materials. These blades are available in the following sizes:

So whether you are in need of a bridge saw blade, or a smaller turbo blade, there are plenty of options out there from which to choose. There are also a variety of resources available to help you get information about fabricating Dekton. One such resource is the DEKTON® Mastidek website.

The main thing to keep in mind is that in order to excel at any craft, you need: 1) Good tooling, 2) Accurate knowledge, and 3) Great skills. All of these are available with a little bit of research and reading.

Granite Jigsaw Blade

Granite Jigsaw Diamond Blades

Granite Jigsaw Diamond Blades

Looking for a granite jigsaw diamond blades that work on a Galeski Jigsaw? Then, you are in the right place. This page lists multiple jigsaw blades that are available from Weha. Hence, the blades that are available are:

  • Granite Jigsaw Blades
  • Marble Jigsaw Blades

In fact, these blades are currently being featured on this website:

The blades above are available through Weha USA or one of Weha’s distributors that carry this item. So be sure to check out the Weha site.

Dekton Blade

Ceramic Dekton Diamond Blades

Ceramic Dekton Diamond Blade

Are you seeking a clean cutting diamond blade that runs right through ceramic and other materials in wet or dry environment? If so, check out the R-Mesh Ceramica Thin Kerf Turbo Blade. This ceramic Dekton diamond blade cuts many materials fast and clean.


As mentioned above, this diamond blade for ceramics can also be used on a variety of materials including:

  • Dekton
  • Lapitec
  • Neolith
  • Ceramic
  • Granite
  • Porcelain
  • Quartzite
  • Engineered Stone

As you can see, this blade takes on virtually all of the brand name ceramic and porcelain type materials. In fact, the blade’s design offers features that make it a must have blade for fabrication professionals.

Blade Design

These R-Mesh blades are a mere 1.2mm thick, making them an effective blade for cutting those hard materials noted above. Additionally, the turbo design removes the cut away material quickly and cleanly. Hence, the blade gets a maximum amount of air. This in turn keeps these blades cool when they are being used in a dry environment.

Available Sizes

Ceramic Dekton diamond Blades are available in multiple diameters including the following:


The following list summarizes the specific characteristics of these blades at a glance:

  • Dry Use
  • Wet Use
  • 1.2mm Thick Blade
  • 7/8″ – 5/8″
  • Max RPM: 12,200

ST CM Blade

St Chop Saw Blade

Chop Saw Diamond Blade

The ST diamond blade is designed for use with compound miter saws to cut a variety of materials. This Chop Saw Diamond Blade leaves the stone smooth and cuts fast.

Stone Compatibility

The ST Chop Saw Blade performs outstanding cuts on a variety of material including the following:

  • Granite
  • Engineered Stone
  • Quartz
  • Marble
  • Natural Stone

In fact, this blade cuts back splashes very well when mounted on a compound miter saw and used for this purpose.

Design and Construction

The design of this blade is what contributes to its effectiveness. It is constructed with a very solid, stiff core. This rigid core will not flex during the cut. Additionally, this diamond blade has a full 3/8″ of diamond around the rim. Diamond extension segments go down the core of this blade. The side diamonds on this blade make it an extremely aggressive cutting blade that leaves the stone very, very smooth. Another result from these design features is the long life of the blade. Finally, the air cool holes allow it to stay cool during continuous continuous cutting.

An Adaptable Blade

The ST Diamond Blade offers a 1″ Arbor. It also comes with 2 bushings mounted in the blade; making it adapt to saws with arbor sizes of 5/8″, 7/8″ and 1″.

Size Availability

The Chop Saw Diamond Blade is available in the following sizes:


  • Dry Use
  • Wet Use
  • Max RPM: 6,100
  • Arbor Compatibility: 5/8″, 7/8″, 1″

CNC Sawjet Blade

CNC Sawjet Diamond Blade

CNC Sawjet Diamond Blade

Looking for layered diamond blade that is designed to cut fast, clean, and quiet? The Matrix S Diagonal Diamond bridge saw blade is a great performer. It also works well as a CNC sawjet diamond blade as well.

Designed for Fast Cutting

The Weha Matrix S is a premium diagonal layered diamond blade that cuts fast, clean and quite. Designed for a variety of materials, fabrication professionals use this blade for cutting the following materials:

  • Granite
  • Engineered Stone
  • Quartz
  • Marble

Uniquely Layered Diamonds

This layered diamond blade is different from other blades with layered diamonds. How so? The Matrix S Diagonal blade diamonds are layered in a diagonal pattern in relation to the core. As a result diamonds are continuously being exposed. Hence, this blade offers 100% continuous cutting with diamonds.

This diamond layering is different form other blades which alternate the diamond layers with filler. Thus producing a layering pattern of diamond, then filler, then diamond, etc. Because of the continuous diamond layers in a diagonal pattern, the Matrix S 18mm height blade will last as long as some 20-25mm height blades. As a result, this unique layered diamond blade is performing like no other blade on the market.

Customer Feedback

If you want to get an idea of the performance and value of this blade, just ask stone professionals that are using it as a CNC Sawjet Diamond Blade. Here is what one customer says about the 12″ Matrix S Blade:

“One of the best blades for Northwood sawjets. At 10′ a min of cut, the Matrix doesn’t deflect, gives clean cuts, and gives great life.”
– Lexington, KY

And that stone pro is not alone, check out the comments on the 16″ Matrix S:

“I have been using these blades for over a year now. best blade I have used on my Park saw.”
– Don Gallaher


“I have this on a 20 HP Marmo and we cut about 50/50 granite/quartz in 3cm. This blade is quiet, smooth and fast. I am amazed at how long it is lasting. We run it dry through some sandstone after the quartz slabs and have not had any problems. Go to blade, for sure.”
– The Artisan

If you are searching for a layered diamond blade that can be used on bridge saws as well as sawjets and want one that offers 100% continuous cutting, try this blade.


  • Diagonal Layered Diamond
  • 18mm Lasts As Long As 25mm
  • For All HP Saws
  • Austrian Segment
  • German Core
  • Silent Core
  • 60/50 Arbor
  • Other Bushings Available

WX2 Multipurpose Blades

WX2 Multipurpose Diamond Blade

WX2 Multipurpose Diamond Blade

If you are the kind of person that sees the value of a leatherman tool or a swiss army knife, then this blade is for you. Because the WX2 is a multipurpose tool, it is used for multiple tasks. Hence, having one of these diamond blades handy is a must for serious fabricators.

The Weha WX2 Multi Blade/Cupwheel is an extremely versatile tool. Hence, you can use this tool for both the shop and the job site environments.

The 5″ WX2 Cupwheel/Blade/Rodding Blade can be used on a variety of materials including:

  • Granite
  • Marble
  • Engineered Stone
  • Quartzite Stone

Cupwheel Tool

The WX2 Multipurpose diamond blade functions as a cup wheel. In fact, you can use this tool as a cup wheel to produce aggressive, yet smooth finished grinding.

Rodding Blade

Although the WX2 Multipurpose tool works well as a cup wheel, it also can be used as a rodding blade. It’s 3/16″ thickness makes this possible. Additionally, the premium quality diamonds that are used for this tool mean it is great item to have with you. Furthermore, whether you are on the job site or in the Shop, make sure you have a WX2 with you.

Traditional Diamond Blade

As its name suggests, the WX2 Multipurpose Diamond Blade can be used as a traditional diamond impregnated blade for cutting with a grinder.


  • Quad Adapter Included
  • Wet Use
  • Dry Use
  • Max 10,000 RPM

The WX2 is available in the following sizes:

Low HP Blade

Low Horse Power Saw Blade

Low Horse Power Saw Blade 14″

The Low Horse Power saw blade is made specifically for rail saws, track saws, and tile saws that have a 3hp or less motor. This diamond blade has a total outside diameter of just under 14″.

The 13 7/8″ diameter of this low horse power diamond blade allows it to fit on popular saws and track saws used by stone professionals in the stone fabrication industry. In fact, this diamond blade works very well with the Blue Ripper rail and Achilli TSA 3hp track saws.

Blade Specifics

  • Outside Diameter is 13 7/8″
  • 60mm Arbor
  • 10mm Segments