The Red Cat saw blade runs steady and is provided at a great price. This bridge saw blade is designed to run on a variety of stone even though it is listed as a “granite blade”. In fact, the Red Cat blade will even cut quartzite. Here is a list of some of the natural and engineered surfaces this diamond blade will cut:
The Red Cat bridge granite blade performs nicely at an appealing price. For tried and true, steady cutting, simply use the auto settings on your saw to monitor the amps and let the blade do its thing.
Another Red Cat series feature, the 15mm high tapered segments allow open cutting with plenty of water to keep this blade sharp. Furthermore, the segments cut clean and consistently.
Finally, Red Cat blades cut clear to the core and cut with very little chatter or chipping. Truly a remarkable blade for shops using good blades at a low price.
The Red Cat is available in the following blade sizes:
The following table lists the sepcification for each of the 3 blade sizes.
Do you need a diamond blade designed to cut soft materials? If so, be sure to give these diamond marble blades a try. Weha designed this vacuum brazed blade for use on softer stones including the following:
These marble blades give a chip free cut, smooth finish, and an excellent life span. In fact, 50% longer than standard vacuum brazed blades. Additionally, this marble blade is vacuum brazed using the new VAC II patented technology.
Chip Free Cut
Drastically Longer Life
Extremely Aggressive, Fast Cut
Great for “Soft” Stones
This blade is available through Weha USA distributors.
This Copper Core Continuous Rim Blade works to cut a litany of materials common in stone fabrication. The reinforced copper core offers added benefits for the stone professional that uses this blade. Continue reading for an overview of this diamond blade.
Cuts Multiple Materials
If you are looking for a diamond blade that cuts many materials, you have found a blade for it. This copper core continuous rim blade cuts an array of stone and glass materials including the following:
This diamond blade produces a chip free cut on the materials listed above. Its special bond allows for cutting these various glass, procelain, and stone products cleanly. This blade also offers a reinforced core to contribute to a clean cut on various materials.
Designed to Last
While the bond allows for a clean cut without chipping, the core offers benefits as well. Copper is a great conductor. So when you cut with this blade the copper core draws heat from its rim. This in turn translates into longer blade life. Additionally it means you will get a near perfect cut.
Available Blade Sizes
The Copper Core Continuous Rim Blade is available in multiple sizes. Here is a listing of the sizes and specifics of this blade:
Have you been looking for a blade to cut a variety of stone materials? Are you in need of a blade that gives a sharp, clean cut and that has a long life? Read more about the Super Quad Versatile Turbo Blade.
The SQ Super Quad Turbo blade is an ultra premium turbo blade from Weha. It’s desirability is no doubt linked to its versatility and cost effective price tag. Therefore, this blade produces sharp, clean cuts on a variety of materials used in the stone industry, including:
This Super Quad Versatile Turbo Blade is a great choice for fabricators looking for an in shop blade. Yet, it also is a budget friendly selection for in field counter top work. Additionally, the versatility is also highlighted by the fact that this blade can be used in both wet and dry fabrication environments.
Air Cool Holes Throughout Blade
Very Stiff Core
The whole body of the blade sports air holes. As a result, the blade stays cooler when it is used for continuous cutting. This versatile diamond blade has a stiff body so it doesn’t deflect or bend during cutting. Additionally, it can be pushed fast through the cutting motion.
Although this diamond blade is made for stone fabricators to use on various fabrication tasks, it has another use. Namely, sculptors use it as a marble sculpting blade.
It is a great diamond blade to use with the following materials:
Because of its design, fabricators and sculptors alike this marble sculpting blade. Why is that the case? It is appealing to stone professionals because of its design features. First, the blade is double-sided. Second, the diamonds extend around the circumference of the blade. Third, both sides perform the same because they have the same design. Hence, when one side is worn down, you simply flip the blade over. So the blade is effective for grinding, shaping, and even shaping the stone types mentioned above.
What is this “marble sculpting blade” capable of? Well, it softly shapes marble and soft stones without chipping and blowouts. It also fits right on all polishers and grinders because it has a 5/8-11 threaded adapter already mounted on the blade.
Blade Specific Features
Smooth, Chip-free Grinding
Quad Adapter Included
Can Be Used As A Blade
Used It As A Cupwheel
Can Be Used Wet
Use It Dry
Why do stone professionals like the Duo Double Sided Marble “sculpting” blade? Notice what customers of Weha are saying about this blade’s design:
“These are the best blades to use on most stone products. They cut easily and you can lay them down flat and cut with them.”
In fact, if you are looking for a cup wheel and a diamond blade in one tool, this is the blade to try.
Are you in the market for a diamond blade that cuts vanity holes and radius circle cuts in soft stones? If so, the Contour Marble Blade is designed to meet the task.
This diamond blade offers a design geared toward vanity hole cuts and radius circle cuts in the following materials:
The cutting performance of the Contour Marble Blade provides absolute minimal chipping. Additionally, this blade for soft stones produces the cleanest cut of any diamond contour blade on marble. Just check out the features of this contour blade for marble:
Diamonds Extend a Full 1 1/4″ Down the Blade
Easy Bowl Cutting
Tight Radius Cuts
Vacuum Brazed for Speed & Life
If you are a professional stone fabricator, installer, or do-it-yourself homeowner, be to sure to give this blade for marble vanity cut outs a try.
Do you need a diamond blade designed to cut soft materials? If so, be sure to give these diamond marble bridge saw blades a try. Weha designed these blades for use on softer stones including the following:
These marble blades give a chip free cut, smooth finish, and an excellent life span. Additionally, the diamond marble bridge saw blades is compatible with saws with 3hp and higher. In fact, some even say that this is the best diamond bridge saw blade for cutting marble and other “soft” stones. Finally, this diamond marble blade has a silent core and a 60/50 arbor.