Category: Porcelain Blades

Sintered Material Porcelain Blade

Sintered Material Blade

Sintered Porcelain Ceramic Diamond Blades

The Tenax Ceramic wet diamond blade for sintered materials is high quality diamond bridge saw blade designed for cutting sintered materials. The quality cut and clean results from this ceramic blade is worth checking out and learning more.

Wet Use Ceramic Blade

The Tenax Ceramic wet blade for sintered materials is designed to cut a plethora of surface types. When it comes to cutting sintered material, the Tenax ceramic diamond blade is a great choice. It is designed to cut materials that are extremely hard and require specific blade specifications. The Ceramic blade by Tenax ahs been developed to meet those requirements.

Blade for Cutting Porcelain

Although porcelain has been around for many decades, the interior design industry has recently begun to use it more and more in the area of surfacing. For example, floors, cladding, facades, and countertops are all surfaces using porcelain. The Tenax Ceramic blade offers just what’s needed to cut these types of materials.

Specifications

  • 2150-2500mm RPM
  • Straight Cut Feed Rate: 800-2000mm Per Minute
  • Miter Cut Feed Rate: 500-1400mm Per Minute
  • Standard 2.3mm Core Thickness

Feed Rate Rate Table

Porcelain Tile Thickness RPM ⌀360 RPM ⌀410 Feed Speed LM/min
3-4.9mm 5-9mm 10-12mm 13-20mm
2150-2500 2150-2500 2150-2500 2150-2500
1900-2200 1900-2200 1900-2200 1900-2200
1.5-1.8 1.2-1.5 1.0-1.2 0.8-1.0
NOTE: It is suggested that the speed feed be reduced by 40-50% while entering and exiting the cut. For cutting at 45° the suggested speed reduction is 40%.

Copper CR Blade

Copper Core Continuous Rim Blade

Copper Core Continuous Rim Blade

This Copper Core Continuous Rim Blade works to cut a litany of materials common in stone fabrication. The reinforced copper core offers added benefits for the stone professional that uses this blade. Continue reading for an overview of this diamond blade.

Cuts Multiple Materials

If you are looking for a diamond blade that cuts many materials, you have found a blade for it. This copper core continuous rim blade cuts an array of stone and glass materials including the following:

  • Ceramic
  • Porcelain
  • Glass
  • Marble
  • Granite
  • Tile
  • Travertine
  • Limestone
  • Onyx

This diamond blade produces a chip free cut on the materials listed above. Its special bond allows for cutting these various glass, procelain, and stone products cleanly. This blade also offers a reinforced core to contribute to a clean cut on various materials.

Designed to Last

While the bond allows for a clean cut without chipping, the core offers benefits as well. Copper is a great conductor. So when you cut with this blade the copper core draws heat from its rim. This in turn translates into longer blade life. Additionally it means you will get a near perfect cut.

Available Blade Sizes

The Copper Core Continuous Rim Blade is available in multiple sizes. Here is a listing of the sizes and specifics of this blade:

Dekton Blade

Ceramic Dekton Diamond Blades

Ceramic Dekton Diamond Blade

Are you seeking a clean cutting diamond blade that runs right through ceramic and other materials in wet or dry environment? If so, check out the R-Mesh Ceramica Thin Kerf Turbo Blade. This ceramic Dekton diamond blade cuts many materials fast and clean.

Materials

As mentioned above, this diamond blade for ceramics can also be used on a variety of materials including:

  • Dekton
  • Lapitec
  • Neolith
  • Ceramic
  • Granite
  • Porcelain
  • Quartzite
  • Engineered Stone

As you can see, this blade takes on virtually all of the brand name ceramic and porcelain type materials. In fact, the blade’s design offers features that make it a must have blade for fabrication professionals.

Blade Design

These R-Mesh blades are a mere 1.2mm thick, making them an effective blade for cutting those hard materials noted above. Additionally, the turbo design removes the cut away material quickly and cleanly. Hence, the blade gets a maximum amount of air. This in turn keeps these blades cool when they are being used in a dry environment.

Available Sizes

Ceramic Dekton diamond Blades are available in multiple diameters including the following:

Specifics

The following list summarizes the specific characteristics of these blades at a glance:

  • Dry Use
  • Wet Use
  • 1.2mm Thick Blade
  • 7/8″ – 5/8″
  • Max RPM: 12,200

CR Stone & Tile Blade

Continuous Rim Stone Tile Blade

Continuous Rim Stone Tile Blade

Looking for a continuous rim stone tile blade that offers a long life and a chip-free cut on many materials? Continuous rim blades give fabrication pros a tool to make these cuts.

Made for Various Materials

The continuous rim stone tile blade is compatible with an array of materials including:

  • Natural Stone
  • Porcelain Tile
  • Ceramic Tile

Blade Design Features

A fast, chip free cut is what this continuous rim diamond blade produces. Not only that, the high diamond concentration means it also provides excellent life. Finally, it is capable of cutting stone and glass materials and leaving a chip free cut.

Available Sizes

Specifics

  • 1″ Arbor
  • Excellent On Natural Stone
  • Excellent On Mosaic Tile
  • Premium Quality
  • Chip Free Cut On Glass Material

CR Tile Blade

Continuous Rim Tile Blade

Continuous Rim Tile Blade

Looking for a continuous rim tile blade that offers a long life and a chip-free cut on many materials? Continuous rim blades give fabrication pros a blade that makes these cuts.

Made for Various Materials

These continuous rim tile blades are compatible with an array of materials including:

  • Natural Stone
  • Porcelain Tile
  • Ceramic Tile

Blade Design Features

A fast, chip free cut is what this continuous rim tile blade produces. Not only that, the high diamond content means it also provides excellent life. Finally, it is capable of cutting stone and glass materials and leaving a chip free cut.

Available Sizes

Specifics

  • 4 x 20mm Arbor
  • 7mm Diamond Rim
  • Premium Quality
  • Chip Free Cut On Glass Material

Extra Thin Blade

Extra Thin Quad Turbo Blade

TF Extra Thin Quad Turbo Blade

Have you been looking for a blade to cut a variety of stone materials? Are you in need of a blade that leaves a smooth edge after cutting? Read more about the Extra Thin Quad Turbo Blade.

The TF Extra Thin Quad Turbo blade is a super thin turbo blade from Weha. Stone professionals create cuts with smooth edges using this thin blade with a reinforced core. In fact, the TF Extra Thin blades work on the following materials:

  • Granite
  • Marble
  • Ceramic
  • Quartz

This Extra Thin smooth cutting turbo blade is a great choice for fabricators looking for a thin, in shop blade. Additionally, this blade is versatile because it can be used in both wet and dry fabrication environments.

Blade Features

  1. Extra Thin Thickness
  2. Air Cool Holes Throughout Blade
  3. Reinforced Core

The whole body of the blade features air holes. As a result, the blade stays cooler when it is used for continuous cutting. This super thin diamond blade has a reinforced core so it doesn’t flex during cutting. Additionally, it can be pushed fast through the cutting motion. These aspects of the blade’s design produce a fast, straight, and aggressive cut.

Specifics

Be sure to check out the Blitz Ultra Premium if you are seeking a high performance turbo blade for granite, engineered stone, and quartz

Super Quad Turbo Blade

Quad Versatile Turbo Blade

SQ Super Quad Versatile Turbo Blade

Have you been looking for a blade to cut a variety of stone materials? Are you in need of a blade that gives a sharp, clean cut and that has a long life? Read more about the Super Quad Versatile Turbo Blade.

The SQ Super Quad Turbo blade is an ultra premium turbo blade from Weha. It’s desirability is no doubt linked to its versatility and cost effective price tag. Therefore, this blade produces sharp, clean cuts on a variety of materials used in the stone industry, including:

  • Granite
  • Marble
  • Ceramic
  • Quartz
  • Limestone
  • Quartzite
  • Travertine

This Super Quad Versatile Turbo Blade is a great choice for fabricators looking for an in shop blade. Yet, it also is a budget friendly selection for in field counter top work. Additionally, the versatility is also highlighted by the fact that this blade can be used in both wet and dry fabrication environments.

Blade Features

  1. Big Rim
  2. Air Cool Holes Throughout Blade
  3. Very Stiff Core

The whole body of the blade sports air holes. As a result, the blade stays cooler when it is used for continuous cutting. This versatile diamond blade has a stiff body so it doesn’t deflect or bend during cutting. Additionally, it can be pushed fast through the cutting motion.

Specifics

Be sure to check out the Blitz Ultra Premium if you are seeking a high performance turbo blade for granite, engineered stone, and quartz