Category: 10″ Blades

Copper CR Blade

Copper Core Continuous Rim Blade

Copper Core Continuous Rim Blade

This Copper Core Continuous Rim Blade works to cut a litany of materials common in stone fabrication. The reinforced copper core offers added benefits for the stone professional that uses this blade. Continue reading for an overview of this diamond blade.

Cuts Multiple Materials

If you are looking for a diamond blade that cuts many materials, you have found a blade for it. This copper core continuous rim blade cuts an array of stone and glass materials including the following:

  • Ceramic
  • Porcelain
  • Glass
  • Marble
  • Granite
  • Tile
  • Travertine
  • Limestone
  • Onyx

This diamond blade produces a chip free cut on the materials listed above. Its special bond allows for cutting these various glass, procelain, and stone products cleanly. This blade also offers a reinforced core to contribute to a clean cut on various materials.

Designed to Last

While the bond allows for a clean cut without chipping, the core offers benefits as well. Copper is a great conductor. So when you cut with this blade the copper core draws heat from its rim. This in turn translates into longer blade life. Additionally it means you will get a near perfect cut.

Available Blade Sizes

The Copper Core Continuous Rim Blade is available in multiple sizes. Here is a listing of the sizes and specifics of this blade:

CR Stone & Tile Blade

Continuous Rim Stone Tile Blade

Continuous Rim Stone Tile Blade

Looking for a continuous rim stone tile blade that offers a long life and a chip-free cut on many materials? Continuous rim blades give fabrication pros a tool to make these cuts.

Made for Various Materials

The continuous rim stone tile blade is compatible with an array of materials including:

  • Natural Stone
  • Porcelain Tile
  • Ceramic Tile

Blade Design Features

A fast, chip free cut is what this continuous rim diamond blade produces. Not only that, the high diamond concentration means it also provides excellent life. Finally, it is capable of cutting stone and glass materials and leaving a chip free cut.

Available Sizes

Specifics

  • 1″ Arbor
  • Excellent On Natural Stone
  • Excellent On Mosaic Tile
  • Premium Quality
  • Chip Free Cut On Glass Material

ST CM Blade

St Chop Saw Blade

Chop Saw Diamond Blade

The ST diamond blade is designed for use with compound miter saws to cut a variety of materials. This Chop Saw Diamond Blade leaves the stone smooth and cuts fast.

Stone Compatibility

The ST Chop Saw Blade performs outstanding cuts on a variety of material including the following:

  • Granite
  • Engineered Stone
  • Quartz
  • Marble
  • Natural Stone

In fact, this blade cuts back splashes very well when mounted on a compound miter saw and used for this purpose.

Design and Construction

The design of this blade is what contributes to its effectiveness. It is constructed with a very solid, stiff core. This rigid core will not flex during the cut. Additionally, this diamond blade has a full 3/8″ of diamond around the rim. Diamond extension segments go down the core of this blade. The side diamonds on this blade make it an extremely aggressive cutting blade that leaves the stone very, very smooth. Another result from these design features is the long life of the blade. Finally, the air cool holes allow it to stay cool during continuous continuous cutting.

An Adaptable Blade

The ST Diamond Blade offers a 1″ Arbor. It also comes with 2 bushings mounted in the blade; making it adapt to saws with arbor sizes of 5/8″, 7/8″ and 1″.

Size Availability

The Chop Saw Diamond Blade is available in the following sizes:

Specifics

  • Dry Use
  • Wet Use
  • Max RPM: 6,100
  • Arbor Compatibility: 5/8″, 7/8″, 1″